Storage Solutions | Carpentry Services Southampton

Shoe Rack with Drawers

February 28, 2019 · by southamptoncarpenter

Made from American Oak this handy piece of furniture answers the question of where to put those shoes that otherwise clutter the hallway.
The two drawers above the rack serve to store scarfs, gloves and other miscellaneous items. The overall depth is 250mm so it does not intrude into the passage.
Finishing oil was used to finish off the piece bringing out the ‘flavour’ of the wood and giving hard wearing protection.

Storage solution in a small cupboard

October 4, 2017 · by southamptoncarpenter

The smallest of cupboards can be transformed into a efficient storage area. Drawing on my boat fitting days where every nook and cranny is utilised for storage the smallest of corners and cupboards, valuable space, can become a useful space.

Storage cupboards

October 4, 2017 · by southamptoncarpenter

Two storage cupboards manufactured using Real wood Oak veneer MDF with the edges lipped in Oak, the shelves can be adjusted up or down using the brass inserts these are fitted into a groove so they are flush. The doors are made from solid Oak and 6mm Oak veneered MDF. The customer asked me to finish the cupboards in finishing oil.

Media shelf

May 5, 2016 · by southamptoncarpenter

Using an Oak kitchen worktop this media shelf was transformed. Oak and Beech worktops used in kitchens make for stylish shelves and benches this shelf once finished in oil will match the Oak floor. media shelf in southampton 2 media shelf in southampton 3

Under stair storage cupboards in Southampton

January 10, 2016 · by southamptoncarpenter

The customer wanted to have a work station as well as some storage cupboards, they wanted a knotty pine finish to match their interior doors so laminated board was used with pine veneer MDF panels for the doors. At a later date some shelves above the table may well come in useful.

IMG_5091_2

Grilled door wardrobe with drawers.

September 14, 2015 · by southamptoncarpenter

A two door, four drawer wardrobe built into an alcove, the advantage of grilled doors is that the contents of the wardrobe are aired so you avoid that musty smell that sometimes occurs in wardrobes, particularly if that wardrobe is built against an external wall. This format of two doors to the left and right hand with drawers in the middle makes full use of the space provided the drawers are fairly deep 300 mm, giving lots of space to store clothes.Internally there are hanging rails on both sides along with shelves. Constructed from 18 mm MDF with softwood lipping on all exposed edges and joinery grade Redwood for the doors, the grills available in several patterns are 8mm MDF.

This slideshow requires JavaScript.

A purpose built wardrobe in Southampton

June 29, 2015 · by southamptoncarpenter

This particular wardrobe was purpose built to fit between a return in the bedroom and the bedroom door, narrower than usual finishing at 700mm wide from floor to ceiling with a four door configuration, this makes best use of the space available without dominating the room. The carcass is 18mm MDF with joinery grade pine fronts and doors.

wardrobe built in Southampton

Storage solution

June 2, 2015 · by southamptoncarpenter

This slideshow requires JavaScript.

Media storage centre. This is a good use of a corner of a room, the drawers contain the cd’s and dvd’s, there is a section for vinyl and a bookcase. Note the underbookcase insert for cable management and the raised table for the t.v. and the space under that for the inevitable ‘box of tricks’ . this was constructed out of American White Oak veneered MDF and solid oak drawers with all edges lipped in solid oak. The customer is finishing the project in a wax or clear polish.

Cupboards fitted along with floating shelves

January 18, 2015 · by southamptoncarpenter

This slideshow requires JavaScript.

Storage cupboard in Southampton

March 24, 2014 · by southamptoncarpenter

Storage cupboard manufactured using 18mm MDF with pine lippings, the pine on the edge of the MDF (lippings) which is 18mmx25mm prevents the MDF Sagging under weight, allows a suitable fastening for the hinge screws, ordinarily a hinge screw will work loose over time if it is fixed straight into the MDF And a better finish will be achieved when the cupboard is painted.

This slideshow requires JavaScript.