Furniture panels with AirTec Edging – Custom built Furniture and storage Cupboards. 
The industry standard is to use cams and locking pins to assemble furniture boards together. We have all seen them and probably used them when we buy flat pack furniture to assemble at home. They work and have the added convenience that with care you can dismantle and reassemble the furniture if you move house for example.

However cams are not great if you wish to achieve a piece which has the characteristics of a traditional ‘solid’ piece of furniture. With this in mind I use a method of construction that entails a trench to be machined into the meeting panels and introduce an Oak batten, I choose Oak because of its sheer  strength thus avoiding splitting should the piece come under stress.The trench is normally 6.3mm wide and 15mm deep on each panel enabling a 6.3mm x 30mm batten to be glued into place. The images below show the construction of two cupboards that are to be used in an office come handicraft workshop environment.

They do not have to be white I can source over 1000 colours with various finishes that can have AirTec Edging. AirTec Edging enables a seamless hardwearing edge to panels and the appearance of a quality piece of furniture. Something that cannot be achieved with the iron on alternatives often employed.The great thing about these furniture boards is that matching existing colour schemes can be achieved which means adding an extra cupboard or an infill does not become an obstacle to enlarging or redesigning an existing installation.