Bespoke Oak Door made from American White Oak with Oak TGV panels. The images show the manufacture and assembly of the door through to the door fitted in its final resting place. The door needed to be made because the dimensions required were not an off the shelf size, i used through mortice and tennon joints and pegged these through the stiles with 12mm Oak dowels to make sure that it remains stable due to the location of the property where the door was fitted -on a water front property facing south west- so its going to get a battering from the elements. The exterior of the door and the edges have been finished prior to fitting with 3 coats of marine grade primer its an aluminium based paint where microscopic particles of aluminum ‘knot’ together to give a tough barrier the customer will finish the door with marine grade undercoat and gloss. The interior of the door can be polished or waxed to show the grain.